 |
Knowledge Base |
P I Q System - Cycling Settings
|
This
page will show you how to change the PTP timing settings on the PIQ software.
1. First, you must click on the "Admin Panel " tab. You will get a page like below. Then you will click on "Settings (C)"
2. Once you get to the page below, click on "Power Settings (B)"
3. Under the "PTP Times" tab you will see these settings. On this menu, you are able to change how the PTP settings work on the software.
A. The PTP values of your clients can be saved to their profile if this switch is enabled.
B. This is the PTP value that the system will give out to all of the clients if they do not have a PTP value in their profile. To use this feature you must enable (C).
C. The PTP values of your clients can be saved to their profile if this switch is enabled.
D. You can set the time for the PTP test. You can set up to 3 different PTP test on the software.
E. The PTP test will take a percentage of the rider's PTP value and set it as the rider's PTP value. You can adjust the values in this section.
F. The PTP values can be saved if this switch is turned on.
4. Under the "Class Modes" tab you will see these settings. On this menu, you are able to change the different modes that are on the cycling screen.
Available Cycling Modes:
Rider - Display all the bikes in the studio. Order by bike number (Bike Number, Power, Watts)
Power - Display all the bikes in the studio based on the total energy of the rider. (Rank, Bike Number, Power, Watts)
Speed - Display all the bikes in the studio based on the total distance of the rider. (Rank, Bike Number, MPH/KPH, Miles/ Meter)
Heart Rate - Display all the heart rate monitors that are connected to a profile in the studio.
PTP - Personal Threshold Power. 3-minute test for the riders to find their maximum sustainable power wattage.
Team - Display the ride as a team. Everyone is split into teams. This mode focuses on Power and Energy.
Peloton - Display the ride as a team. Everyone is split into teams. This mode focuses on MPH/KPH and Miles/Meters.
Weighed - Display all the bikes in the studio based on the watts /LB or watts/KG energy/LB or energy /KG. (Rank, Bike Number, watts/LB or watts/KG ,energy/LB or energy/KG)
Team Weighted - Display the ride as a team. Everyone is split into teams. This mode focuses on watts/LB or watts/KG and energy/LB or energy/KG.
1. First, you must click on the "Admin Panel " tab. You will get a page like below. Then you will click on "Settings (C)"
2. Once you get to the page below, click on "Power Settings (B)"
3. Under the "PTP Times" tab you will see these settings. On this menu, you are able to change how the PTP settings work on the software.
A. The PTP values of your clients can be saved to their profile if this switch is enabled.
B. This is the PTP value that the system will give out to all of the clients if they do not have a PTP value in their profile. To use this feature you must enable (C).
C. The PTP values of your clients can be saved to their profile if this switch is enabled.
D. You can set the time for the PTP test. You can set up to 3 different PTP test on the software.
E. The PTP test will take a percentage of the rider's PTP value and set it as the rider's PTP value. You can adjust the values in this section.
F. The PTP values can be saved if this switch is turned on.
4. Under the "Class Modes" tab you will see these settings. On this menu, you are able to change the different modes that are on the cycling screen.
Available Cycling Modes:
Rider - Display all the bikes in the studio. Order by bike number (Bike Number, Power, Watts)
Power - Display all the bikes in the studio based on the total energy of the rider. (Rank, Bike Number, Power, Watts)
Speed - Display all the bikes in the studio based on the total distance of the rider. (Rank, Bike Number, MPH/KPH, Miles/ Meter)
Heart Rate - Display all the heart rate monitors that are connected to a profile in the studio.
PTP - Personal Threshold Power. 3-minute test for the riders to find their maximum sustainable power wattage.
Team - Display the ride as a team. Everyone is split into teams. This mode focuses on Power and Energy.
Peloton - Display the ride as a team. Everyone is split into teams. This mode focuses on MPH/KPH and Miles/Meters.
Weighed - Display all the bikes in the studio based on the watts /LB or watts/KG energy/LB or energy /KG. (Rank, Bike Number, watts/LB or watts/KG ,energy/LB or energy/KG)
Team Weighted - Display the ride as a team. Everyone is split into teams. This mode focuses on watts/LB or watts/KG and energy/LB or energy/KG.
    |