On the screen you will see: 
Rank (A) - This will show you the rank of the rider based on the energy. 
Bike Number (B) - Displays the bike number on the screen. 
Watts (C) - Watts is the combination of speed (RPM) and resistance. You can increase by either pedaling faster while holding resistance constant or increasing resistance while holding cadence steady. 
RPM (D) - This is the crank revolutions per minute, which is the same as speed. NOTE: Any rpm above  150 RPM will not be displayed because this will increase the  risk of serious injuries.
Energy (E) - Energy is the accumulation of power in watts measured in Kilo Joules (KJ). During every second of the class, the power number is used to calculate the energy in Joules. Joules are divided by 1,000 to calculated Kilo Joules. Unlike Power and RPM number which is refreshed every second, the Energy number is refreshed every 5 seconds at which time the Rank of the rider is updated. 
Mode Selector (F) - Displays all the different cycling modes. Click here to learn more about these modes. 
Class Averages (G) - This will calculate the class average of the RPM,  Power and the total energy the entire class has ridden. 
Timer (H) - This will show you the time left in the class. 


Recommendation:

• When using this mode, a fun way to get the class motivated and to work harder is to turn ON the Interval Timer and have a race to push everyone to their max. Click Here to learn more about the Interval Timer