 |
Knowledge Base |
How To Install The Star Tsp100
|
This article will guide you in setting up your TSP100 printer for the Point of Sale.
Requirements - An admin account for the PC that you are installing the printer on.
Requirements - An admin account for the PC that you are installing the printer on.
In order for the Star TSP100 to work with ClubReady please follow these steps:
1) Unplug Star TSP100 from computer
2) Download and Install the latest drivers for the TSP100 - http://www.starmicronics.com/support/default.aspx
Detailed instructions on how to install the drivers can be found in the PDF located here - https://www.clubready.com/wiki/WK31318704496
3) Configure ActiveX - https://www.clubready.com/wiki.asp?w=WK25402015451
4) Verify StarTSP100 is configured for receipt paper - https://www.clubready.com/wiki.asp?w=WK23155931289
5) Verify IE11 page setup for receipt paper - https://www.clubready.com/wiki.asp?w=WK23167161568
6) Set Star TSP100 as default printer - https://www.clubready.com/wiki.asp?w=WK23141453253
7) Run the POS Active X test page and load and allow sub-drivers (plug-ins) - http://www.clubready.com/apps/installprocess/postest.html
8) You will then need to be using a Full POS - https://www.clubready.com/wiki.asp?w=WK27592012231
    |