 |
Knowledge Base |
Gantner Settings For The ClubReady Desktop Application
|
This article will guide you through setting up the Gantner for customer check in.
Requirements - A Master admin login or a staff type that is able to login into ClubReady.
1. Accessing The ClubReady Desktop Application
To open the ClubReady Desktop Application you will need to left click on the Windows icon for your PC. Type ClubReady in order for the desktop shortcut to show.
2. Login
After the ClubReady Desktop Application starts, you will need to login to the app.
1. Setting The Gantner
Once you have logged in, check the status of the IP address for the Gantner devices. If the IP addresses do not match in the outlined box, you will want to get the IP address for the Gantner devices. The address should display on the device itself on the startup of the device. You can do this by unplugging the device and plugging it back in.
2. Adding The Device
Once you have the IP Address of the devices, you will want to come back to the ClubReady Desktop Application and enter the IP Address of the device and select a device. Click on Add Device.
3. Starting The Device
Once the device has been added, you will then need to start the device by clicking on the device inside the box and then clicking on Start Device. The device status should change from Stopped to Running.
Requirements - A Master admin login or a staff type that is able to login into ClubReady.
Starting The ClubReady Desktop Application
1. Accessing The ClubReady Desktop Application
To open the ClubReady Desktop Application you will need to left click on the Windows icon for your PC. Type ClubReady in order for the desktop shortcut to show.
2. Login
After the ClubReady Desktop Application starts, you will need to login to the app.
Gantner Setup
1. Setting The Gantner
Once you have logged in, check the status of the IP address for the Gantner devices. If the IP addresses do not match in the outlined box, you will want to get the IP address for the Gantner devices. The address should display on the device itself on the startup of the device. You can do this by unplugging the device and plugging it back in.
2. Adding The Device
Once you have the IP Address of the devices, you will want to come back to the ClubReady Desktop Application and enter the IP Address of the device and select a device. Click on Add Device.
3. Starting The Device
Once the device has been added, you will then need to start the device by clicking on the device inside the box and then clicking on Start Device. The device status should change from Stopped to Running.
    |