 |
Knowledge Base |
Internal: Setup Signature Pad In Google Chrome
|
This article will walk you through setting up the Signature Pad in Google Chrome.
Step 1. Make sure the Backoffice setting for Topaz SigWeb is switched to Fully Switched To New.
Step 2. Turn ON the Backoffice Functionality number 281.
Step 3. Configure the settings to work on agreements.
Step 4. Download the drivers.
1. Download
the SigWeb installer at: www.topazsystems.com/software/sigweb.exe.
2. Before
installing, be sure to close all open browsers (i.e. Chrome, Firefox, Internet
Explorer, etc).
3. Run
the SigWeb installer. Note: Do not connect your signature pad until
installation is complete.
4. Plug
in the signature pad.
5. Once
complete, test SigWeb with the SigWeb Demo at this page: www.sigplusweb.com/sigwebtablet_demo.htm
Click
Sign and sign on your signature pad; your signature will appear in the
signature box.
Step 5. Test in ClubReady
Setup Signature Pad In Google Chrome
Setup > Sales > Sales Settings > New Agreements. Use the drop down by Electronic Method for Agreements to select Topaz Signature 1x5.
    |